.dockerignore

@@ -1,10 +0,0 @@
-.editorconfig
-logs
-.venv
-start
-config.yaml
-registration.yaml
-*.db
-*.pickle
-node_modules
-**/*.sock

Dockerfile

@@ -1,49 +0,0 @@
-FROM docker.io/alpine:3.15
-
-ARG TARGETARCH=amd64
-
-RUN apk add --no-cache \
-      python3 py3-pip py3-setuptools py3-wheel \
-      py3-pillow \
-      py3-aiohttp \
-      py3-magic \
-      py3-ruamel.yaml \
-      py3-commonmark \
-      py3-prometheus-client \
-      # encryption
-      py3-olm \
-      py3-cffi \
-      py3-pycryptodome \
-      py3-unpaddedbase64 \
-      py3-future \
-      # proxy support
-      py3-aiohttp-socks \
-      py3-pysocks \
-      # Other dependencies
-      ffmpeg \
-      ca-certificates \
-      su-exec \
-      netcat-openbsd \
-      bash \
-      curl \
-      jq \
-      yq
-
-WORKDIR /opt/matrix-appservice-kakaotalk
-
-COPY requirements.txt optional-requirements.txt ./
-RUN apk add --virtual .build-deps python3-dev libffi-dev build-base \
- && pip3 install -r requirements.txt -r optional-requirements.txt \
- && apk del .build-deps
-
-# Copy specific files & directories to avoid copying the node directory
-COPY LICENSE setup.py docker-run.sh ./
-COPY matrix_appservice_kakaotalk matrix_appservice_kakaotalk
-RUN apk add --no-cache git && pip3 install .[e2be] && apk del git \
-  # This doesn't make the image smaller, but it's needed so that the `version` command works properly
-  && cp matrix_appservice_kakaotalk/example-config.yaml . && rm -rf matrix_appservice_kakaotalk
-
-ENV UID=1337 GID=1337
-VOLUME /data
-
-CMD ["./docker-run.sh"]

SETUP.md

@@ -67,33 +67,4 @@ To use them as-is, follow these steps after [initial setup](#initial-setup):
 Simply `git pull` or `git rebase` the latest changes and rerun any installation commands (`npm install`, `pip install -Ur ...`).
 
 # Docker
-These instructions describe how to run the bridge with Docker containers.
-
-## Notes
-* Any `docker` commands mentioned below need to be run with `sudo` unless you have configured your system otherwise. See [Docker docs](https://docs.docker.com/engine/install/linux-postinstall/) for details.
-* All configuration files created by the Docker containers will be `chown`ed to UID/GID 1337. Use `sudo` access on the host to edit them.
-* The `docker` commands below mount the working directory as `/data`, so make sure you always run them in the correct directory.
-
-## Limitations
-* Images must be built manually for now. It is planned for there to be prebuilt images available to pull.
-
-## Initial setup
-1. `cd` to the directory where you cloned this repository
-1. Ensure that the repository root and `node` directories are writable by UID/GID 1337. A coarse way to achieve this is with `chmod o+w . node`
-1. `cd` to the `node` directory, and build the image for the Node module with `docker build . -t matrix-appservice-kakaotalk-node`
-1. Run a container for the Node module for the first time, so it can create a config file for you: `docker run --rm -v $(pwd):/data:z matrix-appservice-kakaotalk-node`
-1. Update the generated config file `config.json` to your liking
-1. Run the Node module with `docker run --restart unless-stopped -v $(pwd):/data:z matrix-appservice-kakaotalk-node`
-1. Open a new shell, since the prior `docker run` command runs in the foreground (unless `-d` is used)
-1. `cd` to the repository root, and build the image for the bridge module with `docker build . -t matrix-appservice-kakaotalk`
-1. Run a container for the bridge module for the first time, so it can create a config file for you: `docker run --rm -v $(pwd):/data:z matrix-appservice-kakaotalk`
-1. Update the generated config file `config.yaml` to your liking. You'll at least need to change the homeserver settings, appservice address and permissions, and the rpc connection to the Node module
-    * Note that the Node module container's `/data/` directory is accessible in the bridge module's container at `/data/node/`
-    * Thus, if the Node module is configured to use a unix socket at `/data/<sock_name>`, the bridge module's config must set `rpc.connection.path: /data/node/<sockname>`
-1. Generate the appservice registration by running the container again, and update your homeserver configuration to accept it
-1. Run the bridge module with `docker run --restart unless-stopped -v $(pwd):/data:z matrix-appservice-kakaotalk`
-    * Additionally, you should either add the bridge to the same Docker network as your homeserver and database with `--network=<name>` (when they are running in Docker), or expose the correct port(s) with `-p <port>:<port>` or `--network=host` (when they are running outside Docker).
-    * If the Node module is configured to use a unix socket, make sure to start the bridge module's container _after_ the Node module's container. Otherwise, the bridge module may not be able to find the socket file.
-
-## Upgrading
-Simply `git pull` or `git rebase` the latest changes, rerun all `docker build` commands, then run new containers for the freshly-built images.
+Coming soon!

docker-run.sh

@@ -1,36 +0,0 @@
-#!/bin/sh
-
-# Define functions.
-function fixperms {
-	chown -R $UID:$GID /data
-
-	# /opt/matrix-appservice-kakaotalk is read-only, so disable file logging if it's pointing there.
-	if [[ "$(yq e '.logging.handlers.file.filename' /data/config.yaml)" == "./matrix-appservice-kakaotalk.log" ]]; then
-		yq -I4 e -i 'del(.logging.root.handlers[] | select(. == "file"))' /data/config.yaml
-		yq -I4 e -i 'del(.logging.handlers.file)' /data/config.yaml
-	fi
-}
-
-cd /opt/matrix-appservice-kakaotalk
-
-if [ ! -f /data/config.yaml ]; then
-	cp example-config.yaml /data/config.yaml
-	echo "Didn't find a config file."
-	echo "Copied default config file to /data/config.yaml"
-	echo "Modify that config file to your liking."
-	echo "Start the container again after that to generate the registration file."
-	fixperms
-	exit
-fi
-
-if [ ! -f /data/registration.yaml ]; then
-	python3 -m matrix_appservice_kakaotalk -g -c /data/config.yaml -r /data/registration.yaml || exit $?
-	echo "Didn't find a registration file."
-	echo "Generated one for you."
-	echo "See https://docs.mau.fi/bridges/general/registering-appservices.html on how to use it."
-	fixperms
-	exit
-fi
-
-fixperms
-exec su-exec $UID:$GID python3 -m matrix_appservice_kakaotalk -c /data/config.yaml

node/.dockerignore

@@ -1 +0,0 @@
-node_modules

node/Dockerfile

@@ -1,13 +0,0 @@
-FROM docker.io/node:16-alpine3.15
-
-ARG TARGETARCH=amd64
-
-WORKDIR /opt/matrix-appservice-kakaotalk/node
-
-COPY . ./
-RUN npm i
-
-ENV UID=1337 GID=1337
-VOLUME /data
-
-CMD ["./docker-run.sh"]

node/docker-run.sh

@@ -1,16 +0,0 @@
-#!/bin/sh
-
-if [ ! -w . ]; then
-	echo "Please ensure the /data volume of this container is writable for user:group $UID:$GID." >&2
-	exit
-fi
-
-if [ ! -f /data/config.json ]; then
-	cp example-config-docker.json /data/config.json
-	echo "Didn't find a config file."
-	echo "Copied default config file to /data/config.json"
-	echo "Modify that config file to your liking, then restart the container."
-	exit
-fi
-
-node src/main.js --config /data/config.json

node/example-config-docker.json

@@ -1,7 +0,0 @@
-{
-	"listen": {
-		"type": "unix",
-		"path": "/data/rpc.sock",
-		"force": true
-	}
-}